1. Quickly drying speed. Liquid material after centrifugal spraying, the surface area will increased greatly, in high temperature air flow, the moment will evaporate 95~98% of moisture content, so drying time will be about at ten seconds.
2. Adopt parallel flow pattern of spray drying, during drying process, the temperature of the liquid droplet is not high, which promise high quality products.
3. Wide applied area. According to the material properties, can use hot air drying, and also could use the cold wind model.
4.Due to the drying process is completed in an instant, the product of the approximate spherical can basically keep droplets shape, so the product is good dispersion, fluidity and solubility.
5. Production process is simple, convenient operation and easy control.
6. In order to protect the material away from pollution and extend the device service life, all parts contacting with material all adopt 1Cr18Ni9Ti stainless steel materials. In order to make operation easily, the control system use integration operation, which means that install every part’s indicating device and on/off device all in control cabinet.