Centrifugal Spray Dryer Haematococcus Spray Drying Algae Food Industry Spray Drying Equipment use centrifugal spray drying process, which is popular used in liquid forming process and drying industry, most suitable to produce powder and particle solid product from solution, emulsion, suspension liquid and mushy liquid,etc. 

So if final product particle size distrubution, residual water contents, stacking density and particle shape, all these conforms to the precise standards, then centrifugal spray dryer will be the most idea drying process.

Your benefits from Centrifugal Spray Dryer Spray Drying Equipment Algae Food Industry:




1.Fast drying speed, the material liquid after atomization, significantly increased its surface area, when contact with the hot air, can evaporate its 95% - 98% water in an instant, whole drying time just need a few seconds, so especially suitable for drying thermal sensitive material.




2.Spray drying product has good uniformity, fluidity and solubility, powder or particle has higher purity and excellent quality.




3.Spray dryer production process is simple, convenient operation and easy control. For 40%-60% moisture content liquid (special materials can be up to 90%), could spray drying to powder or particle in one time, and dried without crushing & screening, reduce the production process and improve product purity.




4.The spray drying product particle size, bulk density and moisture can be adjusted by changing centrifugal spray dryer operating conditions, control and management both are convenient.




Technical parameters of Centrifugal Spray Dryer Spray Drying Equipment Algae Food Industry:

Items	TGZ-5	TGZ-25	TGZ-50	TGZ-100	TGZ-150	TGZ-200
Inlet temp.（℃）	140-350 Automatic control syste
Outlet temp.（℃）	80-90
Spray type	High speed centrifugal atomizer ( mechanical drive or stepless frequency control speed are optional )
Water evaporation capacity（kg/h）	5	25	50	100	150	200
Atomizer rotary speed（rpm）	25000	22000	21500	18000		16000
Atomizing disc diameter（mm）	60		120		150
Electric heating max power（k w）	8	31.5	60	81	99	Equiped with other heating source
Dry powder recovery（%）	About 95
Length of land occupation（m）	1.6	4	4.5	5.2	7	7.5
Width of land occupation（m）	1.1	2.7	2.8	3.5	5.5	6
Height of spray tower（m）	1.75	4.5	5.5	6.7	7.2	8
Height of spray nozzle install （m）	- -	2.5	2.5	3.2	3.2	3.2
Note: 1. these technical parameters just be FYI, detail please communicate with TOPTION engineer (info@toptionlab.com) to customize based on your actual production process. 2.Water evaporation capacity is related to material characteristic,content of solid and hot air inlet & outlet temperature. 3.You could choose heating method based on your local energy condition,choose dust collection and dusting method based on material characteristic.