As powder production equipment, spray drying equipment is a direct process from liquid to powder, and the drying time is only a few seconds. After the material liquid is atomized, the surface area is greatly increased. In the hot air flow, 95%-98% of the water can be evaporated instantly, the drying speed is very fast.  

The spray drying production process is simplified and the operation & control are convenient. For liquids with a moisture content of 40-60% (up to 90% for special materials), they can be dried into powder products at one time, without crushing and screening after drying, reducing production procedures and improving product purity.

Technical parameters of TOPTION spray drying equipment

Model	TP-S50	TP-S100
Max capacity	5000 ml/h	10000 ml/h
Temperature range of inlet air	140°C ~ 300°C	50°C ~ 300°C
Temperature range of outlet air	80°C ~ 90°C	30°C ~ 150°C
Spray system	Centrifugal nozzle	Centrifugal nozzle
Precision of temp	±1 ℃	±1 ℃
Dryer time	1.0 ~ 1.5 S	1.0 ~ 1.5 S
Speed of squirt pump	5000	10000
Spray direction	Downwards co-current	Downwards co-current
Heater Power	3KW  220V	3KW  220V
Total power	10KW 380V	10KW 380V
Dried powder restoring rate	≥95%	≥98%
Maximum moisture evaporation	5Kg/h	10Kg/h

The picture above shows TOPTION customized spray drying system for customers, please contact us and tell us what powder you want to make and what the expected output is, our strong engineers team can make spray dryer customization according to your actual needs, and we support samples service, you can send your raw materials to us and do experiments with our factory's equipment. 

1. Whole set stainless steel material customize.

2. Two stage cyclone separation type.

3. Spray drying equipment with dehumidifier, condenser, storage tank program customization.

4. spray dryer with dust collection system.