TOPTION RE-52AA 1L rotary evaporator lab small type evaporation machine is suitable for chemistry laboratory, modern organic laboratory, university teaching, to remove solvent from samples by evaporation. Automatic lifting type and manual lifting economical type are optional, matched vacuum pump, chillers are available, if you need larger types, TOPTION provide wide capacity range from 1L 2L 3L 5L 10L 20L 30L 50L 100L lab pilot industry various types.

Ordinary rotavapor operating problems include evaporation speed is slow? vaporized solvent cannot be well collected? Sudden bumping destroys everything you collected? Trouble again on vacuum pump. Awful smell aroud in lab? etc. 

Please check the differences after using TOPTION rotary evaporation set.

1. Three types condensers available for different operation requirements. Standard condenser for normal use. Cold trap type for low boiling point solvent condensing. etc.

2. PTFE sleeve inside taper joint helps to prevent dead seizure, and increase sealing performance.

3. Taper joint lock and release device design.

4. Automatic lifting heating bath, prevents movement of glassware like evaporation flask is safe and easy to operate.

5. Lid for water bath, which can increase evaporation efficiently by 15% and save bath water by 60%. Also could protect operators, which is safe and useful.

6. Anti-corrosion and wearable sealing system, which are specially designed and precisely manufactured. 90% users don't need to replace rotary seal in one year.

7. Laboratory vacuum evaporator whole set customization, include chillers, vacuum pump, vacuum controller.

Relevant model	RE-52AA 1L rotary evaporator
Rotating flask	0.5L
Optional Rotating Flask	0.1L, 0.25L, 1L or 2L
Receiving Flask	0.5L
Lifting Type	Automatic lifting
Condenser	Vertical type
Rotation Speed	0 - 150
Evaporating Speed	1.2 L/h H2O
Reachable Vacuum Rate	Vacuum pump is available,  < 133Pa (1.33mbar, 1 Torr)
Bath Power	1.1 KW
Staic Temp. Control Range & Wave	RT-99 + - 2 celsius degree
Power	220V 50/60Hz




Basic configuration of RE-52AA laboratory type rota evaporation machine




Relevant Model	RE-52AA rotary evaporator
Charging Valve	Glass
PTFE Discharge Valve	PTFE
PTFE Rotary Seal Assembly	Have
Overall Flange Joints	Have
Taper Joint PTFE Sleeve	Have
Frequency Conversion Speed Control	Have
Vacuum Meter	Have
Throttle Valve For Vacuum	Have
Thermometer Neck For Vapor	Optional
Continuous Receiving	Have
Digital Display	Bath temperature
Evaporating Flask Unload Handler	Optional
Ex-proof Motor	Optional
Cold Trap Protection System	Optional
Bumping System	Have
Optional Evaporating Flask (baffles available at request)	1L 2L