Main body | Model | MDS-6A molecular distillation equipment |
Material tank | 1L jacketed glass tank |
Material charging | Differential pressure PTFE valve. |
Feed rate 0.5L~3L/H |
Evaporator | Evaporation area 0.06㎡ |
Film forming way:scraper (roller is optional) |
Material:316L |
Mechanical seal (Magnetic seal is optional) |
Film forming motor:200W motor, electronic speed regulation. |
Cold trap | 1. 0.2㎡chiller cooling cold trap |
2. 1L liquid nitrogen cold trap |
3. Dual-purpose(chiller & liquid nitrogen cold trap dual purpose). |
Choose 1 in above 3 types |
Heavier component discharge | 29# Grinding mouth adapter |
5L glass bottle 1pcs, bottle holder 1pcs |
Lifting table 1pcs |
Lighter component discharge | 29# Grinding mouth adapter |
5L glass bottle 1pcs, bottle holder 1pcs |
Lifting table 1 pcs |
Material pipeline | Jacketed insulation |
Shelf & assemble | 304 stainless steel pipe |
Accessory | Vacuum | 1. No-load < 10PA |
2. No-load < 5PA |
3. No-load < 0.01PA rotary vane molecular pump set (Single phase 220V) |
Vacuum gauge | Resistance / thermo couple vacuum transmitter |
Main evaporator heating | 300℃/3KW |
Raw material section insulation | 200℃/1.5KW |
Heavier component insulation | 200℃/1.5KW |
Lighter componentcondensation & insulation (CBD lighter component could share with material feeding tank) | Internal condenser --- High & low temperature all-in-one machine |
Insulation ---200℃/1.5KW |
External cold trap cooling | 1. Liquid nitrogen cold trap |
Or 2. Chiller
|