views:389
1. Check the instrument carefully before use, and check whether the glass bottle is damaged, and whether the interfaces are consistent.
2.Wipe each interface with a soft cloth (use napkins instead), and then apply a little vacuum grease. After vacuum grease is used must cover, prevent ash sand to enter.
3.Do not screw the connectors too tightly, and loosen and loosen them regularly to avoid the connection death caused by long-term locking.
4.Turn on the power switch first, and then make the machine run from slow to fast.When the machine is stopped,turn off the switch.
5. The ptfe switch everywhere can't be tightened over-force, which can easily damage the glass.
6. After each use, you must use a soft cloth to wipe off all traces of oil, stains and solvents left on the surface of the machine to keep it clean.
7. Unscrew all ptfe switches after stopping the machine, and the ptfe piston will be deformed when it is stationary for a long time.
8.Clean the sealing ring regularly by removing the sealing ring and checking whether there is dirt on the shaft. Wipe it with a soft cloth and then apply some vacuum grease.
9.Do not let water into the electrical part.
Above is the description of the maintenance method of rotary evaporator . If you want to know more about it, you can have a personal experience. Please contact: info@toptionlab.com
0086-29-88763980
0086-29-88990306-8006
Your info are absolutely safe.
Free&Professional report of chinese lab instruments market.